Rigid Film materials
Rigid Film: APET, RPET and PVC/APET Sheet
Rigid film choice follows the job the pack has to do: clarity and stiffness for trays and device nests, barrier for blisters, print surface for premium cartons. APET, RPET and PVC/APET laminated sheet cover most of those cases.
Each grade is quoted with forming window, gauge tolerance and sterilisation position, because those three decide whether a trial succeeds.
- APET for clarity and stiffness
- RPET with declared recycled content
- PVC/APET sheet with gloss print surface
- Forming and sterilisation data per grade
Showing 3 of 16 materials
Filter by category
Filter by application

APET Rigid Film
High-clarity amorphous PET rigid film for thermoformed pharmaceutical and medical packaging

RPET Rigid Film
Recycled-content PET rigid film for sustainable pharmaceutical and consumer packaging

PVC/APET Laminated Rigid Sheet
Composite PVC/APET rigid sheet combining forming performance with a high-gloss print surface
Rigid Film: questions buyers ask
APET or PVC for thermoformed trays?
APET gives clarity and stiffness without chlorine and is the usual choice for device trays and retail-facing packs. PVC forms at lower temperature and suits blisters where barrier and sealing come first. Where both matter, PVC/APET laminated sheet keeps forming performance and adds a high-gloss print surface.
How is recycled content in RPET documented?
RPET is supplied with a declared post-consumer content percentage and supporting certificates, plus mechanical data for the grade. If your market requires a specific chain-of-custody document, say so at enquiry stage so it is built into the specification.
Which grades suit gamma or ETO sterilisation?
Sterilisation compatibility depends on grade and dose, not on the material name alone. We confirm the position per product and supply data for the grade offered instead of a general statement.
Which materials do you supply for pharmaceutical packaging?
We produce blister PVC and high-barrier PVC, APET and RPET rigid film, PVC/APET laminated sheet, cold-form aluminium, PTP aluminium foil, tropical foil, metallized barrier film, composite laminated film and HDPE, PET and PP bottles for oral solids and liquids.
Can you match a film or foil specification we already use?
Yes. Send the existing datasheet, gauge, width and forming depth and we will confirm whether the structure can be matched, and which parameters such as slip, seal window or coating weight need to be agreed before a trial run.
What compliance documentation is issued with an order?
Orders are produced under ISO 15378 and GMP with a batch certificate of analysis, a compliance statement covering USP <661> and EP 3.1/3.2 where applicable, and material datasheets. Additional declarations can be added to the specification for a specific market submission.
Do you supply recycled-content or PVC-free options?
Yes. RPET rigid film carries declared post-consumer content with certificates, and mono-PET or polyolefin structures are available where the product's moisture sensitivity allows. Our engineers will confirm which option fits your barrier requirement.
Related reading
Material Guides Behind the Specification
The comparisons buyers ask for most often, written by the engineers who run the film and foil lines.
- Alu-alu vs PVC/PVDC blister: choosing a barrier formatBarrier data, tooling, cavitation and the specification items that change with the format.
- PVC-free and recycled-content claims: what the paperwork has to showThe evidence behind each common claim, and where claims tend to outrun it.
- Blister seal strength testing: peel, burst and which limit to write downTest methods, sampling positions and the clauses that keep batch results comparable.
- PTP aluminium foil pinholes: causes, detection and specificationsWhere pinholes come from and how to set an acceptance limit per unit area.
- Strip packaging vs blister for unit-dose solidsA selection checklist covering barrier, machine fit, geometry and documentation.
- Metallized barrier film vs PVDC-coated PVCHow the two barrier routes differ on moisture, oxygen, print and recyclability.
Need a custom specification? Contact us for tailored solutions.
Contact Us