Gmp
GreenMedical Packing
Back to NewsRegulatory Updates

PVC-Free and Recycled-Content Claims: What the Paperwork Has to Show

By the Green Medical Packing engineering team

PVC-Free and Recycled-Content Claims: What the Paperwork Has to Show

Why the claim comes before the paperwork

A claim on a carton travels further than the specification file behind it. Distributors repeat it, retailers print it, and a regulator or a customer audit may ask for the evidence months later. When the two do not match, the pack has to be withdrawn or the claim rewritten, and both are expensive.

The practical approach is to write the claim only for the property that can be documented per batch, and to keep the wording proportional to what the document actually states.

What each claim needs behind it

ClaimMinimum evidenceWhere claims usually outrun the evidence
PVC-freeMaterial composition statement for every component, including coatings, inks and adhesivesThe film is PVC-free but the lidding, tray or label is not
Recycled contentSupplier declaration with percentage and source, plus batch recordsA single certificate covers one batch; the current batch has no record
RecyclableDesign assessment for the specific market and collection streamThe material is technically recyclable, the local stream does not accept it
Mono-materialStructure drawing showing every layer and its shareThe structure is mostly one polymer with a small incompatible layer
Bio-basedContent percentage and feedstock documentationBio-based content is confused with biodegradability
CompostableCertification for the relevant standard and a receiving facilityCertified material, but no industrial facility accepts the pack

Each row is a document request, not a marketing decision. If a supplier cannot state the number with a source, the claim is not ready to print.

PVC-free is a composition statement

"PVC-free" is the easiest claim to check and the easiest to get wrong, because a pack is a system. A PET tray may be PVC-free while its lidding, its coating or its adhesive is not. Ask for a composition statement per component, then check the lidding and the print against it.

For bands moving away from PVC in blister and tray formats, [APET rigid film](/products/apet-rigid-film) and [RPET rigid film](/products/rpet-rigid-film) are the usual replacements, with [HDPE bottles for oral solids](/products/hdpe-bottles-oral-solid) covering the bottle formats. The chlorine-free position should be confirmed for the whole pack, not only for the film.

Recycled content needs a number and a batch

Recycled content claims are quantitative, so the paperwork has to be quantitative too: the percentage, the type of recycled material, the source and the batch or lot the declaration refers to. A certificate issued once for a trial batch does not cover production six months later.

Ask three questions: what percentage, verified by whom, and does the declaration come with each delivery? If the answer to the last question is no, the claim belongs in a product development note rather than on a pack.

Recyclable depends on the market

A pack can be recyclable in one country and not collected in another. Design-for-recycling rules, extended producer responsibility fees and local collection streams all shape what the word means on a given shelf. The EU packaging rules summarised in our PPWR article are one example; each market has its own version.

The practical test is not "is the material recyclable", but "will this pack be collected and sorted where it is sold". That answer comes from the market, not from the film datasheet.

Where mono-material claims break

Mono-material packs simplify sorting, which is why the claim is attractive. It only holds when every layer counts. A structure that is 90 percent polyolefin with a small barrier layer is not mono-material in the sense a sorting facility understands, even if the drawing looks close.

If the barrier requirement forces a second material, the honest options are a different structure or a different claim — not a percentage that rounds in the right direction.

How to keep the file auditable

  • One document per claim, with the issuer and date.
  • A batch or lot reference on every quantitative declaration.
  • The market scope stated, since recyclability is market-specific.
  • A revision log, so an old certificate does not resurface.
  • A named owner inside the brand who signs off the wording.

A short checklist before printing

1. Which claim, and who will read it — retailer, regulator or consumer? 2. Which document proves it, and does that document cover this batch? 3. Does the claim hold for the whole pack, including closures and labels? 4. Is the wording proportional to the evidence — no absolute language? 5. Can the evidence be produced within a week if an audit asks?

Send the pack structure and the claims you intend to make through the contact form and our engineers will list the documents we can provide for each one, plus the points where the pack itself has to change. Market-by-market requirements are summarised under industries we serve, and further regulatory notes are in our technical articles.

Have questions about this topic?

Send your pack format and target market — our technical team replies within 48 hours.

Ask the technical team