Strip Packaging materials
Strip Packaging Film and PVC Sheets
Strip packs trade cavity geometry for line speed, so the material has to behave consistently across a long run. Gauge variation that a blister line absorbs becomes a seal defect on a strip machine.
We supply strip packaging PVC and laminated structures with winding, width and slip properties agreed to the machine, and check seal performance on trial rolls before release.
- Gauge profile reported per roll
- Slip and winding to machine
- PVC and laminated structures
- Seal window agreed before release
Showing 2 of 16 materials
Filter by category
Filter by application

Strip Packaging PVC
Precision-engineered sheets for strip and sachet packaging

PTP Aluminum Foil
High barrier lidding foil for push-through blister packaging with superior seal integrity
Strip Packaging: questions buyers ask
Strip pack or blister: how is the format chosen?
Strip packs suit small unit doses at high output and use less material per unit; blisters protect fragile or moisture-sensitive products better and carry more print area. The decision usually follows the dosage form, the barrier target and the line already installed.
Which materials are used for strip packaging?
PVC sheet for standard barrier, and laminated structures where moisture or light protection has to be higher. Paper or foil-based laminates appear where print and barrier are both required.
What causes seal failures on strip lines?
Most often gauge variation, the wrong seal lacquer, or temperature drifting across a long run. We report the gauge profile per roll and agree a seal window so the line has margin instead of running at its edge.
Which materials do you supply for pharmaceutical packaging?
We produce blister PVC and high-barrier PVC, APET and RPET rigid film, PVC/APET laminated sheet, cold-form aluminium, PTP aluminium foil, tropical foil, metallized barrier film, composite laminated film and HDPE, PET and PP bottles for oral solids and liquids.
Can you match a film or foil specification we already use?
Yes. Send the existing datasheet, gauge, width and forming depth and we will confirm whether the structure can be matched, and which parameters such as slip, seal window or coating weight need to be agreed before a trial run.
What compliance documentation is issued with an order?
Orders are produced under ISO 15378 and GMP with a batch certificate of analysis, a compliance statement covering USP <661> and EP 3.1/3.2 where applicable, and material datasheets. Additional declarations can be added to the specification for a specific market submission.
Do you supply recycled-content or PVC-free options?
Yes. RPET rigid film carries declared post-consumer content with certificates, and mono-PET or polyolefin structures are available where the product's moisture sensitivity allows. Our engineers will confirm which option fits your barrier requirement.
Related reading
Material Guides Behind the Specification
The comparisons buyers ask for most often, written by the engineers who run the film and foil lines.
- Alu-alu vs PVC/PVDC blister: choosing a barrier formatBarrier data, tooling, cavitation and the specification items that change with the format.
- PVC-free and recycled-content claims: what the paperwork has to showThe evidence behind each common claim, and where claims tend to outrun it.
- Blister seal strength testing: peel, burst and which limit to write downTest methods, sampling positions and the clauses that keep batch results comparable.
- PTP aluminium foil pinholes: causes, detection and specificationsWhere pinholes come from and how to set an acceptance limit per unit area.
- Strip packaging vs blister for unit-dose solidsA selection checklist covering barrier, machine fit, geometry and documentation.
- Metallized barrier film vs PVDC-coated PVCHow the two barrier routes differ on moisture, oxygen, print and recyclability.
Need a custom specification? Contact us for tailored solutions.
Contact Us